Descargar Imprimir esta página

Cafe CHP9536 Manual Del Propietário página 11

Ocultar thumbs Ver también para CHP9536:

Publicidad

Idiomas disponibles

Idiomas disponibles

Bluetooth
Pairing a Bluetooth
Refer to the literature for the supported device to make
sure it is ready to be paired. NOTE: The Hestan Cue
Quick Guide can be found in the literature packet.
Hold the Precision Cooking pad for 3 seconds until
display reads "Add". Tap
on the unit and
will blink, then activate your device
to initiate the device's pairing mode. Refer to the table
below for device specific instructions.
Supported Devices
Hestan Cue
®
Cookware
Precision Probe
Removing Bluetooth
Hold the Precision Cooking pad for 3 seconds until
display reads "Add". Tap
then tap
to delete all paired devices. The
turn off when complete. NOTE: Your unit cannot delete
a single, or specific device. All of your paired device will
be deleted simultaneously. After all devices are cleared,
devices you wish to use must be paired again.
Precision Cooking
The Precision Cooking feature allows precise temperature control of certain cooking devices for improved results.
Initiating a Precision Cooking Mode
1. Touch the Precision Cooking pad.
2. Any burner available for Precision Cooking will flash.
This excludes any burner on in standard mode. If no
Precision Cooking devices are paired, no burners
will flash as available. NOTE: Only one burner may
run a Precision Cooking mode at a time. If another
precision mode is attempted, the burner in use for
Precision Cooking will flash.
3. The display will read "SEL", instructing you to select a
burner to use.
10
®
Pairing
Device
®
to initiate pairing mode
How to Initiate Pairing
Tap pan handle twice
Press side button once
®
Devices
so that display shows "dEL",
When
stops blinking,
®
device has been added.
Repeat this step for each
additional device. Up to 5
devices will be stored in
memory. To exit Pairing,
touch Precision Cooking
pad one time, or menu will
automatically exit after 60
seconds of no user input.
icon will
4. Touch the On/Off pad for the desired burner, or press
Sync Burners to use Precision Cooking across the
two left burners.
49-2000960 Rev. 0

Publicidad

loading

Este manual también es adecuado para:

Chp9530