Tripp-Lite DWM1327SP Manual Del Propietário página 10

7. Tension Adjustment
Keep the wall mount arm level during tension adjustment. You may need to slightly loosen or tighten the
adjustment screw using the provided Hex Keys depending on the weight of display installed.
If display settles on its own, rotate adjustment screw towards the "+" symbol.
If display rises on its own, rotate adjustment screw towards the "-" symbol.
8. Cable Management
14-04-249-93332D.indb 10
Connect the cables to the display, and press cable cover inward to route the cables
through the space.
Note: Leave slack in cable for cantilever arm movement.
6mm Hex
Key
Tighten the socket screw if the arm
assembly's joints make popping sounds
during adjustment.
10
F O L D 3
D U S T
F O L D 3
D U S T
A
T
C
C H E R
A
C T
C H E R
5/9/2014 9:37:41 AM