Samsung BD-H4500 Manual Del Usuario página 10

Bd Wise (Samsung TVs only)
BD Wise is Samsung's latest inter-connectivity
feature.
When you connect a Samsung player and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the player
and TV, the player outputs video at the video
resolution and frame rate of the Blu-ray Disc/
DVDs.
NOTES
✎
` When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
` If the player is connected to a device that does
not support BD Wise, you cannot use the BD
Wise function.
` For proper operation of BD Wise, set the BD
Wise menu of both the player and the TV to
On.
Resolution
Lets you set the output resolution of the HDMI
video signal to Auto, 1080p, 1080i, 720p or
480p. The number indicates the number of
lines of video per frame. The i and p indicate
interlaced and progressive scan, respectively.
The more lines, the higher the quality.
10
Resolution according to the output
mode
• Blu-ray disc/E-contents/digital Contents
playback
HDMI / connected
Output
HDMI Mode
E-contents/
Setup
Blu-ray Disc Digital
contents
Resolution of
BD Wise 1080p
Blu-ray Disc
Max. Resolution Max. Resolution
Auto
of TV input of TV input
1080p@60F
1080p@60F 1080p@60F
(Movie Frame : Off)
Movie Frame :
1080p@24F 1080p@24F
Auto (24Fs)
1080i 1080i 1080i
720p 720p 720p
480p 480p 480p
• dVd playback
HDMI / connected
Output
Setup
HDMI Mode
BD Wise 480i
Auto Max. Resolution of TV input
1080p 1080p
1080i 1080i
720p 720p
480p 480p
NOTES
✎
` If the TV you connected to the player does
not support Movie Frame or the resolution
you selected, the message "If no pictures are
shown after selecting 'Yes', please wait for 15
seconds to return to the previous resolution. Do
you want to change the resolution?" appears. If
you select Yes, the TV's screen will go blank for
15 seconds, and then the resolution will revert
to the previous resolution automatically.
` If the screen stays blank after you have
changed the resolution, remove all discs, and
then press and hold the p button on the
front of the player for more than 5 seconds.
All settings are restored to the factory default.
Follow the steps on the previous page to
access each mode and select the Display
Setup that your TV will support.
` When the factory default settings are restored,
all stored user BD data is deleted.
` The Blu-ray Disc must have the 24 frame
feature for the player to use the Movie Frame
(24Fs) mode.
movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to
Auto allows you to adjust the player's HDMI
output to 24 frames per second for improved
picture quality.
You can enjoy the Movie Frame (24Fs) feature
only on a TV supporting this frame rate.
You can select Movie Frame only when the
player is in the HDMI 1080p output resolution
modes.
HdmI Color Format
Lets you set the color space format for
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
HdmI deep Color
Lets you output video from the HDMI OUT
jack with Deep Color. Deep Color provides
more accurate color reproduction with greater
color depth.
progressive mode
Lets you improve picture quality when viewing
DVDs.
Audio Settings
digital Output
Lets you select the digital audio output format
that is suitable for your TV or AV Receiver. For
more details, please refer to the Digital Output
Selection table.