General Technical Data; Technical Data Table; Instructions For Installation; Installation - Lotus PCI-74ET Guia Para La Intalación E Instrucciones De Uso

Ocultar thumbs Ver también para PCI-74ET:

Guia para la intalación e instrucciones de uso (27 páginas)

Tabla de contenido

Idiomas disponibles

MODELS

DIMENSIONS cm

POWER SUPPLY

MAXIMUM ABSORPTION A

MAXIMUM POWER kW

POWER SUPPLY CABLE

The data plate is on the front (see diagram in electric connection item) and has all the data necessary for the connection.

When fitting, the appliance must be leveled using a spirit level; slight differences of level can be adjusted by screwing

or unscrewing the adjustable feet. The main switch or the socket must be near the appliance and easily accessible.

It is advisable to place the appliance under an extractor hood so that steam is extracted rapidly. If the appliance is placed

near walls, dividing panels, kitchen furniture, decorative finishes, etc., these should be in flameproof material; otherwise

it is necessary to cover them with non-flammable material.

Above all, it is necessary to ensure that fire prevention standards are observed.

Always comply with the following points during installation:

Ensure that mains voltage complies with the voltage indicated on the specification table of the

appliance

All electrical installations must comply with local standards. All standards issued by national electrical authorities

must be complied with.

When circuit breakers are used, they must be suitable for a minimum of 30 mA.

Avoid obstruction of air intakes or outlets with objects (fabric, walls, etc).

Keep hot air off of the induction appliance (for example when several appliances are next to one another, or behind one

another, or when an appliance is separated by a separate air duct.

The induction appliance must not be placed near or on hot surfaces.