Personnel Qualification And Training; Hazards Caused By Failure To Observe The Safety Regulations; Safe Usage; Safety Of The User Or Personnel Responsible For Use - Lotus PCI-74ET Guia Para La Intalación E Instrucciones De Uso

GB IE
Before using or carrying out maintenance work on the appliance, please read this use, maintenance and installation
manual carefully.
HAZARD
Failure to follow the relative safety regulations, laws and directives could expose you to hazard.
HAZARD
The incorrect use or handling of the generators poses a hazard to people, animals and property.
Failure to ready and study this use and installation manual exposes you to hazard.

Personnel qualification and training.

The personnel responsible for installing, commission, using and maintaining the appliance must be QUALIFIED or
AUTHORISED by the manufacturer.

Hazards caused by failure to observe the safety regulations.

Failure to observe the safety regulations can pose a hazard to people, the surrounding environment and the induction
generator itself. Failure to observe the safety regulations causes the guarantee to become null and void, meaning that
you will no longer be entitled to replacements for damaged parts.
In particular, failure to observe the regulations entails:
· risks of all kinds to people and property.
· hazards of all kinds to people and property.

Safe usage.

It is important to observe the safety regulations in the manual, and the relative national and international laws and
regulations regarding electrical safety, national and international laws and regulations regarding safety in the workplace,
and national and international laws and regulations on accident prevention.

Safety of the user or personnel responsible for use.

Electrical hazards should be excluded. The induction generator should be used by qualified personnel and it should be
installed by a certified professional in compliance with specific international, national and regional regulations on
electrical and electronic appliances for collective use and civil and industrial electrical installations.

Safety of the personnel responsible for use.

The pyroceram area is heated by the heat of the saucepan. To avoid burns, do not touch the heating zone.
To avoid excessive overheating, do not leave the empty saucepan on the heat or heat it for no reason.
If cooking with several saucepans at the same time, make sure that the handles do not cross each other and that they are
outside the field of induction. The handles may become very hot depending on the type of material from which they are
made.
Risk of burns! We recommend using oven gloves.
Saucepans must always be kept a small distance apart. They should not touch each other. When you remove the
saucepan, it is advisable to switch off the cooking zone to prevent the heating system from switching back on
automatically should you happen to replace the saucepan.
Do not place other material (paper, card, fabric, etc.) between the saucepan and the cooking zone as it could catch fire.
Metal objects heat up very quickly if placed in the heating zone when it is in operation. It is therefore advisable not to
place objects other than saucepans on the induction hob (cans, closed tins, aluminium trays, cutlery, rings, keys,
watches, etc.)
People with pace makers should consult their doctor to find our whether they can work in the vicinity of a hob with
induction generator.
Do not place credit cards, phone cards, cassette tapes or other magnetic objects on the pyroceram plate with induction
system.
The induction generator has an internal cooling system. Make sure that the air inlet and outlet holes are not blocked by
objects (paper, rags or other). This could cause overheating and lead the induction generator to switch itself off.
Do not allow liquids (water, oil or other) to enter the induction generator.
Do not clean the generator with a jet of water.
If the pyroceram top is cracked or broken, switch off the induction hob and disconnect the electricity supply.
Do not touch any of the internal parts of the induction generator.

Safety during installation, maintenance and controls.

The personnel responsible for use must be qualified. All installation, maintenance and control operations must be
performed by personnel qualified to issue the relative certificates requested by the relative authorities as regards safety
in the workplace.
43