Publicidad
Idiomas disponibles
Idiomas disponibles
The CHARGE lamp flashes while charging the battery.
•
Remove and reinsert the battery pack, making sure it is installed correctly.
•
The temperature may be inappropriate for charging. Try charging the battery
pack again within the proper charging temperature range (10 °C to 30 °C
(50 °F to 86 °F)).
Shooting still images/movies
Cannot record images.
•
Images are recorded on the internal memory even when a memory card is
inserted into the camera. Make sure that the memory card is fully inserted
into the camera.
•
Check the free capacity of the internal memory or the memory card
(page 24). If it is full, do one of the following:
–
Delete unnecessary images.
–
Change the memory card.
•
You cannot record images while charging the flash.
•
When recording movies, it is recommended that you use the following
memory cards:
–
"Memory Stick PRO Duo" (Mark2) media, "Memory Stick PRO-HG Duo"
media
–
SD memory card, SDHC memory card or SDXC memory card (Class 4 or
faster)
•
Set [Demo Mode] to [Off].
White or purple streaks appear in bright areas of the subject, or
the whole screen of the image becomes reddish.
•
This phenomenon is called smearing. This is not a malfunction. Smearing is
not recorded on still images, but is recorded as streaks or uneven colors on
Sweep Panorama images or movies. ("Bright areas" refers to the sun or
electric lights which are much brighter than their surroundings.)
GB
28
Publicidad
