Product Description; Installation; Before First Use; Use And Operation - Klarstein 10031468 Manual De Instrucciones

1 Temperature control
2 Light
3 Light switch
4 Fan mask
5 Shelf
6 Foot
7 Water box
8 Ream cover
9 Can dispenser
10 Magnetic seal
11 Door
• Install refrigerator in a convenient location away from extreme heat and cold.
• Allow sufficient clearance between the refrigerator and side wall so the door will open without ob-
struction. Refrigerator is not designed for recessed installation.
• Select a space with strong level floor.
• Allow 5 cm of space between the refrigerator's side & wall and 10 cm between back & the wall.
• Clean the appliance, and be thorough, especially in the interior (See „Cleaning and Care").
• In case the interior accessories are not correctly placed, rearrange them as described in chapter

„Product Description".

1. Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth.
2. Clean the interior with a clean moist cloth.
3. Insert the power supply cord into the socket.
4. Tum the thermostat dial to „5" or „low".
5. Close the door and let the refrigerator and operate it emty for 1-2 hours, before you store any
food inside.
Normal Operating
When the refrigerator works with full power, the two LEDs on the circuit board will flash. The red
one shows the power input status. The green one shows the output status of the cooling system.
Meanwhile the fan inside the refrigerator begins to work When the door is opened, the light under
the temperature adjuster will turn on automatically.
7
Product Description

Installation

Before First Use

Use and Operation