WARNING:
To prevent accidental starting that could cause
serious personal injury, always remove the bat-
tery pack from the product when assembling
parts.
CONNECTING THE POWER HEAD AND
POLES
See Figure 2.
For use with mandatory pole only:
Align the arrows on the mandatory pole and the
power head and insert the plug on the manda-
tory pole into the socket on the power head
and push together until fully seated. The plug is
larger on one side and will only install one way.
POWER
HEAD
PLUG
SOCKET
ASSEMBLY
INTERMEDIATE POLE
THREADED BASE
MANDATORY POLE
COLLAR
Lower the collar on the power head to the
threaded base on the mandatory pole and rotate
clockwise to secure.
For extended reach (optional usage) with both
intermediate and mandatory poles:
Align the arrows on the intermediate pole and
the power head and insert plug on the interme-
diate pole into the socket on the power head
and push together until fully seated. The plug is
larger on one side and will only install one way.
Lower the collar on the power head to the
threaded base on the intermediate pole and
rotate clockwise to secure.
Repeat this process to attach the intermediate
pole to the mandatory pole.
THREADED BASE
CUTTING HEAD
POLE
ATTACHMENT
9 — English
COLLAR
COLLAR
POLE SAW
SOCKET
PLUG
Fig. 2