Worx Nitro WG748E Manual Original página 14

Assembling the handle bar &
Adjusting Handle's height
NOTE: Press and hold
Quick-release button during
operation.
Assembling the grass
collection bag
Assembling the grass
collection bag to the lawn
mower
NOTE: Depress the grass
collection bag slightly to
ensure that it is completely
installed.
NOTE: Take the mulching insert
out of the lawn mower before
fitting the grass collection bag.
Removing/emptying grass
collection bag
WARNING! Always check
the safety flap close the
discharge outlet before using.
Never lift the safety flap when
the lawn mower is being used
without fitted grass collection
bag.
Installing mulching insert
14
Removing /fitting the battery
pack
Insert the safety key before
installing the battery pack.
NOTE: This machine will only
run when sp - batteries are
installed. It is recommended to
use the same AH batteries and
charge the two batteries at the
same time.
When you use two batteries
with different AH, the machine
will only run to the lower
common denominator.
Checking the battery charge
condition
NOTE: Fig. G1 only applies for
the battery pack with battery
indicator light.
Charging the battery pack
NOTE: The batteries are
shipped uncharged. Each
battery must be fully charged
before the first mow.
Always fully charge the two
batteries at same time.
More details can be found in
.
charger's manual
Cordless Lawn Mower
See Fig. A1, A2
See Fig. B
See Fig. C1, C2, C3
See Fig. D1,D2
See Fig. E
See Fig. F1, F2
See Fig.G1
See Fig.G2
OPERATION
Power indicator light
See details in BATTERY STATUS
part
IMPORTANT:
When only one light is
illuminated, your battery
is overly discharged, even
though the machine may
still be capable to work.
Continuing to operate
your machine with the
battery in this discharged
condition may reduce the
life and performance of your
battery.
When no light is illuminated,
at least one battery is not
fully installed or battery
may be defective, please
double check the batteries
are fully seated into
position.
Starting and Stopping
Adjusting the cutting height
WARNING! Stop, release
Operating Bail and wait
until the motor stops before
adjusting height. The blades
continue to rotate after the
machine is switched off, a
rotating blade can cause injury.
Do not touch rotating blades.
Storage
BATTERY STATUS (See Fig. H)
• Before starting or after use, press the button beside
the power indicator light on the machine to check the
battery capacity.
• During operation, the battery capacity will be indicated
automatically by the battery power indicator. The
indicator constantly senses and displays the battery
condition as follows.
• Charge the machine with 2 battery packs with different
AH ,the power indicator light displays the battery
condition with the lower one of the two batteries.
Battery indicator
light status
Five green lights
The two batteries are in a highly
( ) are
charged condition.
illuminated.
The two batteries have a remain-
Two, three or four
ing charge. The more lights are
green lights are
illuminated, the more battery
illuminated.
capacity.
See Fig.H
See Fig.I1,I2
See Fig. J
See Fig. ,K1,K2
Battery condition
EN