Publicidad
Idiomas disponibles
Idiomas disponibles
STORAGE
When vacuuming is complete, your RIDGID Wet/Dry
Vac has convenient storage locations.
ACCESSORY STORAGE (Fig. 15)
1. For Storage: Slide the Extension Wands (S) and the
Accessories (R, T, U, V or W) onto the Caster Feet
Posts.
2. To Remove Wands and Accessories: Lightly rotate
and pull upward.
3. Snap additional Accessories (R, T, U, V or W) onto
the Accessory Caddy (M).
CORD STORAGE (Fig. 15)
1. To Store Cord: Wrap the Power Cord around the
Powerhead Carry Handle/Power Cord Wrap (N)
beneath the Two Tabs.
2. Secure the Power Cord using the Cord Clip on the
Polarized Plug.
HOSE STORAGE (Fig. 15)
1. The Tug-A-Long Positive Locking Hose with
Dual-Flex (Q) may be stored around the Powerhead
Assembly (A) using the Two Hose Storage
Clips (O).
LOCKING ACCESSORIES (Fig. 15)
Your RIDGID Wet/Dry Vac includes Locking
Accessories to prevent the Accessories from falling off
when in use.
1. To Connect the Locking Accessories: Align the
Nozzle Ridges of the Accessory (R, T, U, V or W)
with the Locking Tab of your Extension Wand (S).
Press to secure the Nozzle to the Extension Wand.
2 To Disconnect the Locking Accessories: Twist the
Nozzle and Extension Wand (S) to disengage the
Nozzle Ridges and pull. You may also press the
Locking Tab and pull to disengage.
WARNING:
Do not put any object into ventilation openings. Do
not vacuum with any ventilation openings blocked;
keep free of dust, lint, hair or anything that may
reduce air flow.
CAUTION:
Do not operate vacuum while the hose is still
wrapped around the powerhead assembly in the
storage position.
SP7051-1 ESF.indb 12
SP7051-1 ESF.indb 12
(R)
(V)
(S)
(O)
Caster Foot
Post (2)
(S)
Locking
Tab
12
Fig. 15
(M)
(U)
(W)
Cord Clip
(N)
Polarized Plug
Power Cord
(T)
Nozzle Ridges
(U)
4/21/21 10:57 AM
4/21/21 10:57 AM
(Q)
Publicidad
