5.4 Battery status light
The battery status light is solid green when
1
the baby unit runs on battery power and the
batteries contain enough energy.
The battery status light lashes red quickly
2
when the batteries run low while the baby
unit is running on battery power.
•
Replace the batteries when they run low.
•
If the batteries run out of power while the
baby unit is running on battery power, the
baby unit switches off and the parent unit
loses connection with the baby unit.
D
Note:
We advise you to use the baby unit on mains
power, as the baby unit has a limited operating
time when you use it on non-rechargeable alkaline
batteries. The operating time on non-rechargeable
batteries is 24 hours.
10
6 Functions and
feedback on the
parent unit
6.1 Volume
The volume can be set if the menu is not active.
There are seven volume levels and a 'volume off '
setting.
6.1.1 Setting the volume level
Press the + button or the - button once.
1
The current volume level appears on the
•
display.
Press the + button to increase the volume or
2
press the - button to decrease the volume.
The parent unit beeps at every volume step
•
At maximum volume, the parent unit gives
•
two beeps.
If no button is pressed for more than
•
2 seconds, the volume level indication
disappears and the volume setting is saved.
6.1.2 Volume off
Below the lowest volume setting, there is a
'volume off ' setting.
Press the + button or the - button once.
1
The current volume level appears on the
•
display.