Philips SCD560/00 Manual Del Usuario página 12

6.3.2 Battery empty
If the rechargeable batteries are almost empty,
1
the battery status light lashes red quickly.
If you do not connect the parent unit to the
2
mains, the following happens in succession:
1 The link with the baby unit is lost.
2 The display goes out.
3 The parent unit switches off.
D
Note:
If you switch on the parent unit when its
rechargeable batteries are almost empty, the
display goes on. The message 'BATTERY LOW'
appears on the display for 2 seconds before the
parent unit switches off.
6.3.3 Charging
Insert the small plug in the parent unit and put
the adapter in a wall socket. When the parent unit
charges, the following happens in succession:
The display goes on for 4 seconds and the
1
text 'CHARGING' appears on the screen for
2 seconds.
The battery status light is solid green when
2
the parent unit is connected to the mains.
The irst segment in the battery status
3
indicator starts lashing to indicate that the
rechargeable batteries are charging.
12
The second segment in the battery status
4
indicator starts lashing when the rechargeable
batteries are charged to more than 30% of
their capacity.
The third segment in the battery status
5
indicator starts lashing when the rechargeable
batteries are charged to more than 50% of
their capacity.
When the rechargeable batteries are full, the
6
following happens:
• The third segment in the battery status
indicator stops lashing.
• The display goes on for 4 seconds and
the message 'BATT FULL' appears on the
display.
• The battery status light turns solid green.