Publicidad
Idiomas disponibles
Idiomas disponibles
GAS CONVERSION
WARNING: Explosion Hazard
• Use a new CSA International approved gas supply line�
• Install a shut-off valve�
• Securely tighten all gas connections�
• If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36cm) water column�
• Examples of a qualified person include: licensed heating personnel, authorized gas company personnel, and
authorized service personnel�
• Failure to do so can result in death, explosion, or fire�
The range can be used with Natural Gas or LP/Propane Gas� The range is manufactured from the factory for use
with Natural Gas� A kit for converting to LP/Propane Gas is supplied with your cooktop� The kit is marked "For LP/
Propane Gas Conversion"�
NOTE: When the cooktop is converted for LP/Propane Gas, the LP gas supply is required to provide a minimum
of 10" to a maximum of 14" water column to the cooktop regulator�
The conversion must be performed by a qualified service technician in accordance with the kit instructions and
all local codes/requirements�
CAUTION: Failure to follow instructions could result in serious injury�
Parts Required
Wrench
Converting to LP/Propane Gas
Max Output
burner Type
Auxiliary burner
Semi-Rapid burner
Triple Ring burner
1�
Turn the manual
shut-off valve to
the closed position�
(Refer to Figure 13�)
2�
Unplug range or
disconnect power�
3�
Unscrew the regulator
cap with the wrench�
(Refer to Figure 14�)
7mm Nut Driver
Min Output
kw
kw
1
0�3
2
0�55
4�5
1�5
Manual Shut-Off Valve
"Closed" Position
To Range
Small Flat-Head Screwdriver
(2 to 2�4 mm or 3/32" tip
size, 60 mm long)
Natural Gas
Nozzle
Cons
(mm)
(M
3
/h)
1 x 1�10
0�1
1 x 1�20
0�19
5 x ø0�99
0�43
figure 13
Gas Supply Line
12
Safety Glasses
LPG
Nozzle
(mm)
1 x 0�70
1 x 0�80
5 x ø0�56
Regulator
Retainer Pin
Retulator Cap
figure 12
Cons
(g/h)
73
124
327
figure 14
Publicidad
