Publicidad
Idiomas disponibles
Idiomas disponibles
EnGLIsh
Batteries
Cat #
V
Ah
DC
DCB546
18/54
6.0/2.0
DCB547
18/54
9.0/3.0
DCB548
18/54
12.0/4.0
DCB549
18/54
15.0/5.0
DCB181
18
1.5
DCB182
18
4.0
DCB183/B/G
18
2.0
DCB184/B/G
18
5.0
DCB185
18
1.3
DCB187
18
3.0
DCB189
18
4.0
DCBP034
18
1.7
DCBP518
18
5.0
*Date code 201811475B or later
**Date code 201536 or later
***Battery charge times matrix provided for guidance only; charge times will vary depending on temperature and condition of batteries.
General Power Tool Safety Warnings
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a ) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2) Electrical safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b ) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c ) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
40
Weight (kg) DCB104
DCB107
1.08
60
270
1.46
75*
420
1.46
120
540
2.12
125
730
0.35
22
70
0.61
60/40**
185
0.40
30
90
0.62
75/50**
240
0.35
22
60
0.54
45
140
0.54
60
185
0.32
27
82
0.75
50
240
Chargers/Charge Times (Minutes)***
DCB112/
DCB115/
DCB113
DCB1102
DCB1104
170
140
90
270
220
135*
350
300
180
450
380
230
45
35
22
120
100
60
60
50
30
150
120
75
40
30
22
90
70
45
120
100
60
50
40
27
150
120
75
d ) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e ) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f ) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3) Personal safety
a ) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
b ) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
c ) Prevent unintentional starting. Ensure the switch
is in the off position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on
invites accidents.
d ) Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in
personal injury.
DCB116
DCB117
DCB118 DCB132 DCB119
80
40
60
110*
60
75*
150
80
120
170
90
125
22
22
22
60/45** 60/40** 60/40**
30
30
30
75/60** 75/50** 75/50**
22
22
22
45
45
45
60
60
60
27
27
27
60
50
50
90
X
135*
X
180
X
230
X
22
45
60
120
30
60
75
150
22
40
45
90
60
120
27
50
75
150
Publicidad
