Hansgrohe Metro E 06697 5 Serie Guía Rápida página 4

deco-ring
anneau decor
aro decorativo
4
English
Install the Baseplate (optional)
AquaEra only: If using the optional baseplate,
remove the deco-ring from the base of the faucet.
All models: Position the baseplate and gasket
over the holes in the mounting surface. Install the
mounting pieces and collars.
If the mounting surface does not have three holes,
unscrew the studs from the baseplate.
Installation
Install the spout.
Place the faucet and sealing ring on the mounting
surface.
Install the plastic washer, friction washer, metal
washer, and mounting nut.
If the mounting surface is greater than 1⅜", or if
there is insufficient space, omit the plastic washer.
Tighten the mounting nut.
Tighten the screws.