Tripp-Lite SmartOnline S3M30KXD Manual Del Propietário página 20

3. Installation and Setup
27) Use the Battery Fuse PCB to connect batteries and refer to the Figures 3.5, 3.6 and 3.7. Refer to Table 3.1 for a complete battery
wiring listing.
BAT +1 cable to positive pole of #40 battery.
BAT +2 cable to positive pole of #80 battery.
BAT N1 cable to positive pole of #20 battery.
BAT N3 cable to positive pole of #60 battery.
BAT +1
Left Side
S3M30KX/S3M30KXD
S3M40KX/S3M40KXD
Figure 3.5
BAT -2
Notes:
• The blue numbers in above figures are "Battery Numbers" from 1 to 80, which are used for battery position identification.
• There are 2 red wires, 2 black wires and 4 blue wires, which connect the battery fuse board and batteries.
• S3M30KX/KXD/NIB battery fuse board part number: 71-303365-XXG.
• S3M40KX/KXD/NIB battery fuse board part number: 71-303366-XXG.
BAT +2
* Only the BAT -2 cable and connector is routed through the cable grommet.
Battery Fuse PCB
Input BAT-1
BAT N1
BAT N3
Figure 3.7
BAT -1 cable to negative pole of #1 battery.
BAT -2 cable to negative pole of #41 battery.*
BAT N2 cable to negative pole of #21 battery.
BAT N4 cable to negative pole of #61 battery.
BAT -2*
Right Side
S3M30KX/S3M30KXD
S3M40KX/S3M40KXD
Figure 3.6
Input BAT +1
BAT N2
BAT N4
20
BAT N4
BAT N3
BAT +2