Publicidad
Idiomas disponibles
Idiomas disponibles
• Brush any loose dust off the filter (12).
• To remove the pre-filter, rotate the pre-filter
counterclockwise and carefully slide it clear
of the dust container.
• The dust container can be cleaned.
Wipe with a damp cloth or rinse with
warm soapy water and allow to dry.
• The filters are re-usable and should be
cleaned regularly. Rinse with warm
soapy water and allow to dry.
• Install the pre- filter into the dust container
(11) rotating it clockwise until it locks into
place.
• Install the main filter into the pre-filter.
• Install the dust container (11) to the
appliance, rotate it clockwise until it locks
into place.
wARNING:
Respiratory Hazard: Never use the
appliance without the filters. Optimum dust
collection will only be achieved with clean
filters.
CAUTION:
appliance on when dust container is removed.
Replacing the filters
The filters should be replaced every
6 to 9 months and whenever worn or
damaged. Replacement filters are available
from your Black & Decker dealer (cat. no.
PVF110):
• Remove the old filters as described
above.
• Fit the new filters as described above.
Maintenance
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized
service centers or other qualified service personnel, always using identical replacement parts.
I
Projectile/
Do not turn
6
G
H
J
Publicidad
