Pioneer SUPER TUNER III DEH-P3150 Manual Del Operador página 33

A Title (English)
Initial Setting Menu Functions
The Initial Setting Menu features the following functions.
Setting the Time
This is the mode for setting the time on the unit's clock display. (Refer to page 34 for
details concerning the clock display.)
1. Select the time setting mode in the Initial Setting Menu.
2. Select "Hour" or "Minute"
with the 2/3 buttons.
3. Set as desired time with the
5/∞ buttons.
As soon as you switch to "Minute",
the seconds start counting from 00.
Changing the FM Tuning Step (FM STEP)
The tuning step employed by Seek Tuning in the FM mode can be switched between
100 kHz (preset at the factory) and 50 kHz.
1. Press the FUNCTION button and select the FM Tuning Step mode (FM
STEP) in the Initial Setting Menu.
2. Switch the desired tuning step
with the 2/3 buttons.
Note:
• If Seek Tuning is performed in 50 kHz steps, stations may be tuned in imprecisely. Tune in the sta-
tions with Manual Tuning or use Seek Tuning again.
32 33