Publicidad
Idiomas disponibles
Idiomas disponibles
Positioning the Digital Camera in the Waterproof Case
If a water leak is detected ...
➀
Immediately take the waterproof case out of the water and dry it on the outside.
➁
Take the digital camera out of the waterproof case. If you see any drops of water
on the digital camera, wipe them off at once.
When taking the camera out of the waterproof case, open the waterproof case
with the lens facing downwards to avoid the camera falling out. Also, when
opening the waterproof case, take care not to catch your fingers or palm in the
waterproof case.
➂
Make sure that there are no cracks in the waterproof case body. Check the O-
ring for attached foreign particles, flaws, cracks, odd shape, or twisting, and for
foreign particles in the O-ring groove.
➃
When all is well, start over from the procedure on page 8.
If you find something wrong with the waterproof case, immediately stop using
it and contact your FUJIFILM dealer.
If water has entered the camera body, stop using it immediately and contact
your FUJIFILM dealer. Using the camera in a faulty state may cause fire or
electric shock. Do not use it in this state under any circumstances.
Any kind of foreign particle attached to the
O-ring may cause a water leak. Remove
the foreign particles after checking how to
on page 22.
Hair
EN-14
Lint
Sand
Publicidad
