Publicidad
Idiomas disponibles
Idiomas disponibles
2610056809 GSR GSB18V-975C 03-21.qxp_GSB18V-975C 3/5/21 4:33 PM Page 11
Bit Tip Holder
Store only bit tips in the on-
tool bit holder. Longer bits
could interfere with proper tool operation and
result in user injury.
The four piece bit tip holder can be used for
convenient on tool storage of your most commonly
used bits.
When mounting bit holder accessory, mount on
the side of the drill opposite the belt clip.
Always make sure you securely tighten the
mounting screw before use. (Fig. 4).
Auxiliary Handle
The tool must be supported with the auxiliary
handle during operation.
To mount the auxiliary handle on the tool
loosen the hand grip (A). Pull on the sleeve (B)
and slide the collar on to the tool as shown
(C). Swivel the handle to desired position (D).
Secure the handle in place by tightening the
hand grip (E). See Fig. 5.
To remove the handle for transportation or
storage reverse the steps above.
Assembly
H ND GRIP
SAVE THESE INSTRUCTIONS
BIT HOLDER
E
SLEEVE
A
B
COLL R
FIG. 4
FIG. 5
D
C
11
Publicidad
