on the phone. The next time you power on, the unit will automatically connect to the most recently
connected mobile phone.
Play from Bluetooth Device
After successful Bluetooth connection, press the
the tracks backwards or forwards. To pause or resume play, press the
the button
to disconnect Bluetooth.
Playing a compact disc (CD)
NOTE: Never touch the laser lens inside the CD compartment. Clean the laser lens using a CD cleaner
disc if it becomes dirty.
1. Press the POWER button to turn on the unit.
2. Press the SOURCE button repeatedly to select the CD function.
3. Press and hold the
side facing up).
4. Press and hold the
seconds, then play the 1st track automatically.
5. To temporarily stop playback, press the
6. Press the
button to STOP play.
REVERSE/FORWARD
1. The
and
high speed.
2. Press the
button once to hear the beginning of the current track. Press it two or more times to
hear previous tracks on the disc.
3. Press the
button to hear the next tracks on the disc.
4. Press and hold the
previous track(s); When the desired track section is found, release the button and normal play will
resume.
5. Press and hold the
track(s). When the desired track section is found, release the selected button and normal playback
will resume.
REPEAT FUNCTION
The CD REPEAT button may be used to repeat a single track or repeat all tracks on a compact disc.
1. Press the REPEAT button once during playback, the "REPEAT ONE" sign will appear on the LCD
display for about 2 seconds. The same track will be repeated over and over.
2. Press the REPEAT button a second time to repeat all tracks. The "REPEAT ALL" sign will appear
on the LCD display for about 2 seconds.
3. To cancel REPEAT PLAY, press the REPEAT button repeatedly until "REPEAT OFF" appears on
the LCD display for about 2 seconds.
PROGRAM FUNCTION
The Program feature may be used to program up to 20 tracks to play in a selected order.
1. While in the stop mode only (CD is not playing), press and hold the PROG button for 2 seconds,
and the LCD display will show the wording "P 01" and "T 01" starts to flash.
2. Press the
and
3. Press the PROG button to select and store the track into memory.
4. Repeat step 2 to 3 to select up to 20 tracks.
5. To play the selected tracks (in the program mode), press the
6. Press the
button to hear the previous program track or press the
program track.
Note: After all programmed tracks have been played, the CD player will return to the stop mode.
7. To clear the programmed tracks from memory, press
button to open the CD door and insert a CD into the tray (with printed label
button again to close the CD DOOR and the disc will rotate for a few
Buttons are used to jump to a different track number or to scan disc tracks at
button. The current track will be scanned and move backwards to the
button, the current track will be scanned and move forward to the next
buttons to allocate the desired track.
button to play. Press the
button, and to resume playback, press it again.
button twice.
- EN 11 -
or
button to skip
button again. Press and hold
button.
button to hear the next