GE AEH12 Manual De Instrucciones página 12

SECURE THE CASE IN THE
9
WINDOW AND INSTALL THE
FOAM TOP WINDOW GASKET
A
Attach the window locking brackets (one
on each side) with Type C screws.
B
Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
C
window to prevent air and insects from
getting into the room.
10 INSTALL THE AIR CONDITIONER
IN THE CASE
A Slide the air conditioner into the case by
the base pan. Do not push on the controls,
styrofoam air discharge housing or the
finned coils. Make sure the air conditioner
is firmly seated.
Base Pan
Installation Instructions
Do not press on
these areas—
damage to the
unit may result
12
INSTALL THE AIR CONDITIONER
10
IN THE CASE (CONT.)
B
Replace the 2 ground screws removed
earlier, one on each side of the case.
IMPORTANT: The ground screws must be
reinstalled to ensure a proper ground.
C Attach the front grille to the case by
inserting the tabs on the grille into the
slots on the front top of the case. Push
the grille in.
D Secure the front grille to the case by
replacing the 2 screws removed earlier.
Press on the top of the grille to help
with side screw installation.
Connect power.
E