Use-Instructions - Phonocar 5/871 Manual De Instrucciones

Important notes regarding Installation
With the following car-models: ALFA - AUDI - FIAT - SEAT
SKODA - VOLKSWAGEN, the Interface can be used also on the sy-
stems with CD-Changer.
The functions of the CD-CHANGER will remain unchanged.
With the following car-models: CITROEN - HONDA - MAZDA
PEUGEOT - RENAULT - TOYOTA, the Interface can be connected by
excluding the Original CD-CHANGER.

Use-Instructions

When CD-CHANGER is present, start the Unit by pressing the key RA-
DIO, then the key CD-CHANGER situated on the car-radio.
When CD-CHANGER is not present, start the unit by pressing the key
CD-CHANGER situated on the car-radio.
I-POD-Functions
CD1-key on the car-radio:
• Pressing the CD1-key on the car-radio, you will enter the
Music-Playlist: the commands can now be effected both on
the I-POD and the car-radio.
Operating on the I-POD, you will have all functions; operating
on the car-radio, you will get ONLY the functions Forward/
Backward, one track after the other, by pressing the key
FF/REW.
• The Track-number appearing on the radio-display might not be
correct.
Radio-keys CD2 - CD3 - CD4 - CD5 - CD6:
• Pressing the radio-keys CD2 - CD3 - CD4 - CD5 - CD6,
you will get the Playlist of the I-POD, from where you can
choose only the first 5 Tracks. The Track-Skipping can be
effected only from the car-radio or the Steering-Wheel
comands, by using the keys FF/REW.
• If the Playlist contains more than 5 tracks, the exceeding
number of tracks will not be reproduced.
• If the Playlist contains less than 5 tracks, press the keys
corresponding to the missing tracks, so that the Unit will
place itself on the track CD1.
TO BE CONTINUED
➧