Fanimation The Edgewood TF721 Serie Manual Del Propietário página 10

Installing the Switch Cup Assembly (cont'd)
2. Assemble the switch cup assembly onto the
housing adapter with three screws. (Figure 18)
1. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 19)
2. Check the operation of the fan by gently pulling on
the fan speed pull chain.
Pull Chain Operating Sequence
1 st Pull
2 nd Pull
3 Pull
rd
4 Pull
th
3. If airflow is desired in the opposite direction, turn the
fan off and wait for the blades to stop turning. Then
slide the reverse switch to the opposite position and
turn fan on again. Your fan model is equipped with a
4-position, 3-speed, pull chain switch. (Figure 20)
Reverse Switch Information
Season Rotation Direction
Summer Counter-Clockwise
Winter Clockwise
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.
RECOMENDED: Periodically check that the blade holders to motor hub screws are secure and tight.
Periodic light dusting of the blades is recommended.
A feather duster will work best.
All manuals and user guides at all-guides.com
Operating Instructions - Pull Chain
High
Medium
Low
Off
Switch Position
Left
Right
Maintenance
Blade Cleaning
Speed Control
Pull Chain
CAUTION
Do not use solvents when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
Avoid using water, cleansers, or harsh rags, which can
warp and ruin the blades.
10
Figure 18
MAIN FUSE BOX
Figure 19
Reversing
Figure 20
Switch