Publicidad
Idiomas disponibles
Idiomas disponibles
small workpiece in one hand and
the tool in the other hand while
in use. Clamping a small workpiece
allows you to use your hand(s) to
control the tool. Round material such
as dowel rods, pipes or tubing have a
tendency to roll while being cut, and
may cause the bit to bind or jump
toward you.
■
Position the cord clear of the
spinning accessory. If you lose
control, the cord may be cut or
snagged and your hand or arm may
be pulled into the spinning accessory.
■
Do not operate the power tool near
flammable materials. Sparks could
ignite these materials.
ADDITIONAL SAFETY WARNINGS
■
Clamp workpiece with a clamping
device. Unclamped workpieces can
cause severe injury and damage.
■
Injuries
may
aggravated, by prolonged use of
a tool. When using any tool for
prolonged periods, ensure you take
regular breaks.
■
Ambient temperature range for tool
during operation is between 0°C and
40°C.
■
Ambient temperature range for tool
storage is between 0°C and 40°C.
■
The
recommended
temperature range for the charging
system during charging is between
10°C and 38°C.
ADDITIONAL BATTERY SAFETY
WARNINGS
■
To reduce the risk of fire, personal
injury, and product damage due to
a short circuit, never immerse your
tool, battery pack or charger in fluid
4
Original Instructions
be
caused,
or
ambient
or allow a fluid to flow inside them.
Corrosive
or
such as seawater, certain industrial
chemicals, and bleach or bleach-
containing products, etc., can cause
a short circuit.
■
Ambient
temperature
battery during use is between 0°C
and 40°C.
■
Ambient
temperature
battery storage is between 0°C and
20°C.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance
with local and national provisions and
regulations.
Follow
all
special
on
packaging
and
transporting batteries by a third party.
Ensure that no batteries can come in
contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking.
Check with the forwarding company for
further advice.
KNOW YOUR PRODUCT
See page 135.
1. Battery port
2. Battery cap
3. LED indicator
4. On/off switch
5. Operator's manual
6. Clamp nut
7. Straight chisel blade
8. Wrench
9. Gouge blade
10. Battery pack
11. USB-C port
12. V-chisel blade
conductive
fluids,
range
for
range
for
requirements
labelling
when
Publicidad
