Publicidad
Idiomas disponibles
Idiomas disponibles
Fanaway Classic Installation Instructions
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit
panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts supplied
with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire strands or
connections.
Fig. 11
8 | P a g e
All manuals and user guides at all-guides.com
ELECTRICAL WIRING DIAGRAM
1.
Connect the household live supply wire
(black) to receiver input wire (black, AC IN L) as
shown in Fig. 11.
2.
Connect the household neutral supply wire
(white) to the receiver input wire (white, AC IN N).
3.
Connect the household ground wire to the
fan bracket ground wire (green) and fan body
ground wire.
4.
Connect the reveiver output wire (black, TO
MOTOR L) to motor live input wire (black, TO
MOTOR L).
5.
Connect the receiver output wire (white, TO
MOTOR N) to motor neutral input wire (white, TO
MOTOR N)
6.
Connect the receiver output wire (blue, FOR
LIGHT) to fan light live input wire (blue, FOR
LIGHT)
7.
After connecting the wires, spread them
apart so that the green and white wires are on one
side of the outlet box and the black and blue wires
are on the other side.
8.
Turn the connecting nuts upward and push
the wiring into the outlet box.
L D - 0 0 0 3 - 1 6 / X X X / 0 1
Publicidad
