Descargar Imprimir esta página

Ryobi P2001 Manual Del Operador página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNINg!
When using electric gardening appliances, basic safety
precautions should always be followed to reduce the risk
of fire, electric shock and personal injury.
READ All INsTRUCTIoNs
 For safe operation, read and understand all instructions
before using this product. Follow all safety instructions.
Failure to follow all safety instructions listed below, can
result in serious personal injury.
 Do not allow children or untrained individuals to use this
unit.
 Check the work area before each use. Remove all objects
such as rocks, broken glass, nails, wire, or string which
can be thrown or become entangled in the machine.
 Wear eye protection which is marked to comply with ANSI
Z87.1 when operating this product.
 Use Safety Glasses – Always wear safety glasses with
side shields. Everyday glasses have only impact resistant
lenses. They are NOT safety glasses. Following this rule
will reduce the risk of eye injury.
 Protect your lungs. Wear a face or dust mask if the
operation is dusty. Following this rule will reduce the risk
of serious personal injury.
 Dress Properly – Use of rubber gloves and substantial
footwear is recommended when working outdoors.
 Wear heavy, long pants, long sleeves, boots, and gloves.
Do not wear loose fitting clothing, short pants, or go
barefoot. Do not wear jewelry of any kind.
 Secure long hair above shoulder level to prevent entangle-
ment in moving parts.
 Keep children away - Keep all bystanders, children, and
pets at least 50 ft. away.
 Stay alert - Do not operate this unit when you are tired, ill,
or under the influence of alcohol, drugs, or medication.
 Do not operate in poor lighting.
 Keep all parts of your body away from any moving
part.
 Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases, or
dust. Power tools create sparks which may ignite the
dust or fumes.
 Avoid body contact with grounded surfaces such as pipes,
radiators, ranges, and refrigerators. There is an increased
risk of electric shock if your body is grounded.
IMpoRTANT sAFETy INsTRUCTIoNs
 Avoid Dangerous Environments - Don't expose power
tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
 Use Right Appliance - Do not force tool. Use the correct
tool for your application. The correct tool will do the job
better and safer at the rate for which it is designed.
 Do not operate the equipment while barefoot or when
wearing sandals or similar lightweight footwear. Wear
protective footwear that will protect your feet and improve
your footing on slippery surfaces.
 Do not overreach. Keep firm footing and balance.
Overreaching can result in loss of balance.
 Avoid accidental starting. Be sure switch is in the locked
or off position before inserting battery pack. Carrying tools
with your finger on the switch or inserting the battery pack
into a tool with the switch on invites accidents.
 Do not use tool if switch trigger does not turn it on or off.
Any tool that cannot be controlled with the switch trigger
is dangerous and must be repaired.
 Disconnect battery pack from the appliance before
storing, servicing, changing accessories such as cutting
line. Such preventive safety measures reduce the risk of
starting the tool accidentally.
 Use only identical manufacturer's replacement parts and
accessories. Use of any other parts may create a hazard
or cause product damage.
 Maintain appliance with care - Replace string head if
cracked, chipped, or damaged in any way. Be sure the
string head is properly installed and securely fastened.
Failure to do so can cause serious injury.
 Check for damaged parts. Before further use of the tool,
any part that is damaged should be carefully checked
to determine that it will operate properly and perform its
intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting,
and any other conditions that may affect its operation. A
guard or other part that is damaged should be properly
repaired or replaced by an authorized service dealer.
 Make sure all guards, straps, deflectors and handles are
properly and securely attached.
 Use only the manufacturer's replacement string in the
cutting head. Do not use any other cutting attachment,
for example, metal wire, rope, or the like. To install any
other brand of cutting head to this string trimmer can
result in serious personal injury.
 Never operate unit without the grass deflector in place
and in good condition.
3 — English

Publicidad

loading