afriso Unitel Manual De Instrucciones página 25

2 Information on safety
2.1 Safety messages and hazard categories
These operating instructions contain safety messages to alert you to poten-
tial hazards and risks. In addition to the instructions provided in these oper-
ating instructions, you must comply with all directives, standards and safety
regulations applicable at the installation site of the product. Verify that you are
familiar with all directives, standards and safety regulations and ensure com-
pliance with them prior to using the product.
Safety messages in these operating instructions are highlighted with warning
symbols and warning words. Depending on the severity of a hazard, the
safety messages are classified according to different hazard categories.
NOTICE indicates a hazardous situation, which, if not avoided, can
result in equipment damage.
2.2 Intended use
This product may only be used for measuring the level of the following media:
• Fuel oil EL as per DIN 51603-1
• Diesel fuel as per EN 590
• Fatty acid methyl ester (FAME) as fuel oil as per EN 14214
• Fatty acid methyl ester (FAME) as biodiesel as per EN 14214
• Flammable liquids of danger class A III and non-flammable liquids with
the following prerequisites:
- The vapours of the liquids do not attack plastic materials (PA, PS, PE),
Cu, Zn and Sn alloys and elastomers.
- The liquid does not belong to danger classes AI, AII or B.
- Cinematic viscosity < 300 mm
Any use other than the application explicitly permitted in these operating
instructions is not permitted and causes hazards.
Information on safety
NOTICE
2
/s.
EN
Unitel
3