Dolmar AH-3655 Manual De Instrucciones página 7

ENGLISH (Original instructions)
1. Red part
2. Button
3. Battery cartridge
4. Housing
5. Knob
6. Handle
7. Switch trigger B
8. Switch trigger A
9. Adjusting dial
10. Adapter
11. Hook
12. Tool
13. Belt
14. Arm cord hook
SPECIFICATIONS
Strokes per minute (min
Overall length
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
........ Read instruction manual.
..................... Do not expose to rain.
Cd
............... Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment
or battery pack together with
household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and
waste batteries and accumulators
and their implementation in
accordance with national laws,
electric equipment and battery pack
that have reached the end of their life
must be collected separately and
returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
Explanation of general view
15. Holder
16. Extension cord (Battery adapter)
17. Adapter (Battery adapter)
18. Trimming direction
19. Hedge surface to be trimmed
20. Tilt the blades.
21. String
22. Press
23. Chip receiver
24. Nut
25. Shear blade
26. Branch catcher
27. Hooks
28. Fit the hooks into groove
Model
Blade length
-1
)
Net weight
AH-3655
550 mm
1,070 mm
General Power Tool Safety
END013-2
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS HEDGE TRIMMER
SAFETY WARNINGS
1. Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2. Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. A
moment of inattention while operating the hedge
trimmer may result in serious personal injury.
3. Carry the hedge trimmer by the handle with the
ENE014-1
cutter blade stopped. When transporting or
storing the hedge trimmer always fit the cutting
device cover. Proper handling of the hedge trimmer
29. Grooves
30. Press the hooks on both sides
31. Unlock the hooks
32. Blade cover
33. Screws
34. Under cover
35. Plate
36. Crank
37. Oval hole of shear blade
38. Limit mark
39. Holder cap cover
40. Screwdriver
41. Brush holder cap
1,000 - 1,800
5.1 kg
D.C.36V
AH-3665
650 mm
1,150 mm
5.2 kg
GEA010-1
GEB062-2
7