STERWINS 40VBL2-GT.1 Instrucciones De Montaje, Utilización Y Mantenimiento página 225

Ocultar thumbs Ver también para 40VBL2-GT.1:

Idiomas disponibles

• Use rakes and brooms to loosen debris before blowing.

• Clear the work area before each use. Remove all objects, such as rocks, broken glass,

nails, wire, or string, which can be blown a considerable distance by high velocity air, or

become entangled in the fan.

• Wear a face fi lter mask in dusty conditions to reduce the risk of injury associated with

the inhalation of dust.

• Do not point the blower nozzle in the direction of people or pets.

• Never place objects inside the blower tubes.

• Do not operate the product near open windows, etc.

• Slightly dampen surfaces in dusty conditions.

• Use the full blower nozzle extension so the air stream can work close to the ground.

• Do not place the blower on top of or near loose debris. Debris may be sucked into the

intake vent resulting in possible damage to the product.

• Do not use the power tool if the switch does not turn it on and off . Any power tool that

cannot be controlled with switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/or the battery pack from the power

tool before making any adjustments, changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow persons unfamiliar

with the power tool or these instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

• Maintain power tools. Check for misalignment or binding of moving parts, breakage

of parts and any other condition that may aff ect the power tool' s operation. If damaged,

have the power tool repaired before use. Many accidents are caused by poorly maintained

power tools.

2.8 BATTERY TOOL USE AND CARE

• Recharge only with the charger specifi ed by the manufacturer. A charger that is suitable

for one type of battery pack may create a risk of fi re when used with another battery

pack.

• Use power tools only with specifi cally designated battery packs. Use of any other battery

packs may create a risk of injury and fi re

• When battery pack is not in use, keep it away from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal objects that can make a connection from

one terminal to another. Shorting the battery terminals together may cause burns or a

fi re.

227

Up40