Buttonhole; Preparation; For Sewing - Kenmore 385.15212 Manual De Instrucciones

SECTION VII. BUTTONHOLE
Buttonhole
M
{1_ Pattern selector: U (BH)
{2_ Presser foot: Automatic buttonhole foot
{3_ Thread tension: _ to 5
{4} Stitch length control: _ (0.25 to 1
_5_Stitch width control: 5
@
BH
_ 0--1--2--3--4--5 _
• Preparation for sewing
(_ Groove
@Pin
Attach the automatic buttonhole foot R. Insert needle
thread through hole in foot before attaching foot to foot
holder. Make sure the groove on the foot holder catches
the pin on the foot when lowering the presser foot.
• To sew
(_ Button holder
(_) Buttonhole lever
The buttonhole size is automatically set by placing the
button in the rear of the automatic buttonhole foot
The button holder on the foot takes a button up to 1.0"
(2.5 cm) in diameter.
Make a test buttonhole on an extra piece of the fabric to
check your settings.
Use interfacing on stretch fabrics.
[] Pull the button holder(_to the back, and place the
button in it. Push it forward tightly against the button.
[] Pull the buttonhole lever(_down as far as it will go.
[]
[]
66