Nikon AF-S VR Zoom-Nikkor 70-300mm f/4.5-5.6G IF-ED Manual Del Usuario página 20

3. Vibration reduction mode (VR@)
■Basic concept of vibration reduction
En
Set the vibration reduction mode switch to [NORMAL].
Set the vibration reduction mode switch to [ACTIVE].
When taking pictures
Set the vibration reduction mode switch to either [NORMAL] or [ACTIVE]
When taking panning shots
Set the vibration reduction mode switch to [NORMAL].
When taking pictures from a moving vehicle
Set the vibration reduction mode switch to [ACTIVE].
■The effects of vibration reduction
Pictures can be taken at shutter speeds approx. 4 stops* slower than is
possible without using a VR2 lens.(*Under Nikon measurement conditions.
The effects of vibration reduction vary depending on individual and shooting
conditions.)
20
Camera shake
Panning shots
Strength of vibration
Camera shake
when taking pictures
from a moving
vehicle