Hands Free (Vox) Mode; Roger Beep - TTI PMR-506TX Manual De Instrucciones

channel the unit will pause for 5 seconds before resuming the
dual watch.
To activate the dual watch mode, first select a radio channel
(see Channels) as the primary channel. To select the dual watch
channel press the FUNCTION button until
the UP or DOWN button to select the desired dual watch
channel.
Press the PTT or FUNCTION button or wait for 5 seconds to
store your choice and activate the dual watch.
The radio display will alternate between the primary and dual
watch channels and the dual watch icon will appear.
To deactivate the dual watch press the SCAN button.
If you press the PTT button whilst receiving a signal in dual
watch mode the radio will transmit on the currently displayed
channel. If you press the PTT button when no signal is present
the radio will transmit on the primary channel.

5) Hands Free (VOX) mode

When Hands Free (VOX) mode is selected the radio will
automatically transmit when the microphone detects your voice
(or other noise). It can be used with the internal microphone or
an appropriate audio accessory (available separately).
To avoid accidental operation and reduce the effect of
background noise there are 2 microphone sensitivity settings.
(high and low)
To activate the Hands Free (VOX) mode, press the FUNCTION
button until appears. Use the UP or DOWN button to
change the sensitivity level. Press the PTT or FUNCTION button
or wait for 5 seconds to store your choice and activate the VOX
mode. The VOX icon will appear when VOX mode is active.
Repeat this process and change the sensitivity setting to
deactivate the Hands Free (VOX) mode.

6) Roger Beep

The Roger Beep is a short tone that is automatically added to
the end of your transmissions to tell other users that you have
finished speaking. You can activate or deactivate the Roger
Beep as required.
To change the Roger Beep setting, press the FUNCTION button
until appears. Use the UP or DOWN button to change the
appears. Use
10
to