Equipment And Accessories Supplied; Fitting The Batteries; Battery Charging - TTI PMR-506TX Manual De Instrucciones

2. Equipment and Accessories Supplied

1) PMR-506TX radio (with internal battery)
2) Smart Charger with Adaptor
3) Instruction Manual

3. Fitting the Batteries

The PMR-506TX uses an internal Lithium Ion or Lithium Ion
Polymer battery which has been pre-installed.
For removal or replacement please contact your local dealer.
Unauthorised attempts to remove or replace the battery will void
your warranty and may damage your product.

4. Battery Charging

To charge your radios, carefully follow these instructions.
Note: This unit should not be used during being mounted and
charged on the charging cradle.
1) Charger Installation
Connect the power adaptor to the mains power supply and
connect the adaptor power plug to the charger cradle.
When the battery being charged the LED lights red.
2) Radio Cradling & Charging
Remove all radio accessories and insert your radios in the
charging compartment until you hear locking sound. The radio will
start charging and the LED will light red during charging.
3) Charging Completed
The battery charging time is typically 6~7 hours. When the battery
is fully charged the LED will change to green.
Adaptor Power Plug
Power Adaptor
- Input: 100~240VAC 50KHz
- Output: 9V 500mA
Charging Cradle
LED
5
1 unit
1 unit
1 unit