Key Beep; Room Monitor; Intercom - TTI PMR-506TX Manual De Instrucciones

setting.
Press the PTT or FUNCTION button or wait for 5 seconds to
store your choice. The Roger Beep icon will appear when Roger
Beep is active.

7) Key Beep

If the Key Beep is activated, your radio will emit a confirmation
tone whenever you use the keypad. You can activate or
deactivate the Key Beep as required.
To change the Key Beep setting, press the FUNCTION button
until appears. Use the UP or DOWN button to change the
setting. Press the PTT or FUNCTION button or wait for 5
seconds to store your choice. The Key Beep icon will appear
when Key Beep is active.

8) Room Monitor

The Room Monitor is similar to Hands Free (VOX) mode,
but it ignores short, brief noises and uses only the highest
microphone sensitivity level. When Room Monitor mode is
activated, the radio will transmit for 15 seconds when it detects
a continuous noise for 5 seconds or more. If the noise persists
the radio will transmit for another 15 seconds.
To activate the Room Monitor mode, press the FUNCTION
button until appears. Use the UP or DOWN button to
change the setting. Press the PTT or FUNCTION button or wait
for 5 seconds to store your choice and activate the Room
Monitor. The Room Monitor icon will appear when the Room
Monitor is active.
NB The Room Monitor function is not a replacement for
regularly checking the safety and security of children. If you
move out of communication range you will not hear
transmissions.

9) Intercom

This radio has intercom capability that allows you and your partner
to communicate with each other using the intercom connector,
which is optionally available.
To change the intercom setting, press the FUNCTION button until
appears. Use the UP or DOWN button to change the setting.
Press the PTT or FUNCTION button or wait for 5 seconds to store
your choice. The intercom icon will appear when intercom is active.
Please contact your dealer to get the optional intercom
accessories.
11