Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
CARTRIDGE REPLACEMENT
- Turn off the water supply to the faucet .
- Tip the handle (1) back to expose the set screw (2). Loosen the set screw (2) with the hex key and
remove the handle (1).
- Gently pull-out the decorative cap (3) and unscrew the retaining nut (4).
- Pull the cartridge (5) out of the faucet body (6) and replace it with a new ceramic cartridge. Ensure
new cartridge is seated properly with the locating pins in appropriate place .
- Secure the cartridge in place using the retaining nut (4).
- Gently tighten the retaining nut (4) using a wrench. Do not overtighten.
- Reinstall the decorative cap (3). Slide the handle (1) back onto the cartridge and make sure it
rotates freely. Secure the handle (1) in place using the set screw (2).
- Turn the water supply to the faucet back on .
- Operate the faucet to make sure everything works correctly and check for leaks .
Handle Lever (1)
Decorative Cap (3)
Retaining Nut (4)
Please contact cs@conglomkb .com or 1-877-333-0098 for further assistance .
Cartridge (5)
Fig . 9
9
Set Screw (2)
CONGLOMKB .COM
Publicidad
