Publicidad
Idiomas disponibles
Idiomas disponibles
FirEbox PackagE contEnts
K
1
FIREBOx
L
1
REMOTE
M
2
CR2032 BATTERY
N
3
METAL TRIM
O
11
FIREBOx TRIM SCREW
assEmbly
Before assembly, use scissors to unwrap the parts from the packaging. DO NOT use a box cutter or
exacto-knife as you may cut into the mantel pieces inside the box and damage the finish. Check for the
hardware bag which is RED and located inside the packaging, taped to the top box. DO NOT discard
any pieces.
1. Locate the front panels F & G and shelf support H. Insert 4 wood
dowels (a) into the edges of shelf support H. Line up and insert the
wood dowels (a) in shelf support H into the holes in the edges of
front panels F & G until flush.
2. Locate base B. Insert 4 wood dowels (a) in the front of base B. Line
up the wood dowels (a) in base B with the holes in the bottom of
front panels F & G. Lower the front panel assembly onto base B.
Insert a bolt (d) through a washer (e) and insert and tighten the bolt
(d) through the hole in front panel F into base B. Do not strip the bolt
(d) by overtightening.
Repeat the process for front panel G.
All manuals and user guides at all-guides.com
K
L
M
G
Hardware Used
a
Wood Dowel
G
Hardware Used
a
Wood Dowel
d
Bolt
e
Washer
O
N
F
H
x 4
F
B
x 4
x 2
x 2
Publicidad
