Muskoka ABRAMS MTVS2506SBCH Instrucciones página 5

5. Note: Top is heavy. It is recommended that 2 people be used at this
point in the assembly.
Insert 8 wood dowels (a) in the holes along the top of panels D, E,
F & G. Line up the holes in top A with the wood dowels (a) in panels
D, E, F & G and lower the top A until flush.
Insert 6 bolts (d) through 6 washers (e) through the blocks on the
top of panels D, E, F & G into the holes in top A. Turn the bolts (d)
to tighten. Do not strip the bolts (d) by overtightening.
6. Locate shelf trim I. Insert and tighten 3 cam lock dowels (b) in the
holes on the edge of shelf trim I.
Do not strip the cam lock dowels (b) by overtightening.
Insert 2 wood dowels (a) into the holes in the front edge of shelf
C. Line up and insert the 3 cam lock dowels (b) in shelf trim I into
the 3 holes in the front edge of shelf C. Line up the wood dowels (a)
in the front edge of shelf C with the holes in shelf trim I and push
together until flush. Insert 3 cam locks (c) into the holes in the
underside of shelf C. Make sure the arrows on the cam locks (c) are
facing towards shelf trim I. Turn the cam locks (c) to tighten. Do not
strip the cam locks (c) by overtightening.
All manuals and user guides at all-guides.com
A
C
D
F
Hardware Used
a Wood Dowel
d Bolt
e Washer
I
C
Hardware Used
a Wood Dowel
b Cam Lock Dowel
c Cam Lock
E
G
x 8
x 6
x 6
I
x 2
x 3
x 3