Publicidad
Idiomas disponibles
Idiomas disponibles
3. Locate side panels D & E. Insert 4 wood dowels (a) into the outer
holes on the inside of panels D & E. Insert and tighten 4 cam lock
dowels (b) in the middle holes on the inside of panels D & E.
Do not strip the cam lock dowels (b) by overtightening.
4. Locate shelf C. Line up and insert the wood dowels (a) and cam
lock dowels (b) in side panel D into the 4 holes in the edge of shelf
C and push together until flush. Insert 2 cam locks (c) into the holes
in the underside of shelf C. Make sure the arrows on the cam locks
(c) are facing towards panel D. Turn the cam locks (c) to tighten. Do
not strip the cam locks (c) by overtightening.
Repeat process for panel E.
Insert 4 wood dowels (a) into the holes in base B. Line up and insert
the wood dowels (a) in base B into the holes in the bottom of panels
D & E and push together until flush. Insert 2 bolts (d) through 2
washers (e) through the blocks on the bottom of panel D into the
holes in base B. Turn the bolts (d) to tighten. Do not strip the bolts
(d) by overtightening.
Repeat process for panel E.
Insert 2 bolts (d) through 2 washers (e) through the blocks on the
front of panel D into the holes in panel G. Turn the bolts (d) to
tighten. Do not strip the bolts (d) by overtightening.
Repeat process for panel E.
Insert 2 bolts (d) through 2 washers (e) through the blocks on the
top of shelf support H into the holes in shelf C. Turn the bolts (d) to
tighten. Do not strip the bolts (d) by overtightening.
4
All manuals and user guides at all-guides.com
D
Hardware Used
a
Wood Dowel
b
Cam Lock Dowel
C
D
H
F
B
Hardware Used
a
Wood Dowel
c
Cam Lock
d
Bolt
e
Washer
E
x 4
x 4
E
G
x 4
x 4
x 10
x 10
Publicidad
