INSERTING AND RELEASING
THE BATTERY PACK
Only use the Oregon® brand Series B battery
packs specified in these operating instructions
Align the groove in the battery with the rails
inside the battery port Firmly insert the battery
pack into the hedge trimmer's battery port,
pressing forward until it clicks as it locks into
place (Fig 10)
FIG. 10
To remove the battery pack, lift up on the
battery release and remove the pack (Fig 11)
FIG. 11
16
Operating the Hedge Trimmer
General Operation
WARNING: Always wear proper gloves
and eye protection.
OPERATING TEMPERATURE
This hedge trimmer is designed to operate
within a temperature range of 32°F to 104°F
(0°C to 40°C)
GRIP
Always grip the tool with both hands For right-
handed operation, place the hedge trimmer on
a firm, flat surface, grasp the front handle with
the left hand and the rear handle with the right
Wrap fingers over the top of the front handle
with the thumb below (Fig 12)
FIG. 12
For left-handed operation, grasp the front
handle with the right hand and the rear handle
with the left (Fig 13)
FIG. 13
RIGHT-HANDED GRIP
LEFT-HANDED GRIP
Hedge Trimmer Model HT275