Oregon HT275 Manual De Instrucciones Original página 17

STANCE
Stand with both feet on solid ground, with
weight evenly spread between them
Do not overreach and do not stand on a ladder,
stepstool, or any raised position that is not
fully secured
Hold the hedge trimmer as close as possible to
the body to maintain control (Fig 14)
FIG. 14
Hedge Trimmer Model HT275
Operating the Hedge Trimmer
STOPPING THE HEDGE TRIMMER
Release the throttle trigger to stop the hedge
trimmer
STARTING THE HEDGE TRIMMER
Grasp the front and rear handles firmly Pull
back on trigger lock-out (1) with thumb (Fig
15) Squeeze the throttle trigger (2) until the
cutting blades move at the desired speed The
front handle switch (3) is a safety feature; the
hedge trimmer will not start unless it is
activated
FIG 15
CONTROLLING CUTTING BLADE SPEED
The throttle trigger controls the speed at
which the cutting blades oscillate Squeeze the
throttle trigger more firmly for faster cutting
speed
Use the lowest pressure required to cut the
material This helps to maximize the amount of
cutting time per battery charge and reduces the
number of charging operations required
(3) FRONT HANDLE SWITCH
(2) THROTTLE TRIGGER
(1) TRIGGER
LOCK-OUT
17