Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLING GREASE MESH FILTERS
To install filters for the following four steps .
1. Angle the filter into slots at the back of the hood.
2. Push the button on handle of the filter.
3. Release the handle once the filter fits into a resting position.
4. Repeat to install all filters.
CARBON FILTER - not supplied
Activated carbon filter can be used to trap odors. Normally the activated carbon filter should be changed
at three or six months according to your cooking habit. The installation procedure of activated carbon
filter is as below.
In order to install the activated carbon filter, the aluminium filter should be detached first. Firstly open
carefully the stainless steel cover, then press the lock of aluminium filter and remove it.
1. Put the carbon filter on the back side of the aluminium filter.
2. Insert the steel wire into the frame of the aluminium filter, one on each side. You need to bend it to
insert into the other end of the frame.
3. Make sure the steel wire fix the carbon filter onto the aluminium filter.
NOTE:
● Make sure the filter is securely locked. Otherwise, it would loosen and cause dangerous.
● When activated carbon filter attached, the suction power will be lowered.
Filters should be washed separately to crockery and kitchen uten-
sils. it is advisable not to use rinse aid.
● Removing the filters as the instruction of right picture .
● Please do not use abrasive detergent for it will damage the hood.
[ EN ● 13 ]
Version: 3:0
KEN002DH 24.02.2021
Publicidad
