Publicidad
Idiomas disponibles
Idiomas disponibles
3. To install onto the wall, drill 4 holes of Ø 8mm on a suitable place
according with the centre distance of hole in the back of the cooker
hood
4. Insert 4 pcs wall plugs into the holes, fasten 2 pcs screws
(ST4×30mm) in the upper wall plugs, leaving them 2 mm out of the
wall. See Pic 2
5. Put up the cooker hood onto the fixed screws of the wall. See pic 2.
6. Fix the cooker hood on the wall with 2 pcs screws (ST4×30mm), see pic 3.
7. Put the outlet into the cooker hood, fix the expansion pipe on the outlet with cable tie, and lead it to the
outdoor. See pic 4. If you use the indoor ventilation,you can cover the outlet by the outlet cover and then
open the indoor air ventilation. Note: the expansion pipe is not included in the product. See pic 5.
pic 4
[ EN ● 7 ]
KEN002DH 24.02.2021
80 mm
60 cm
pic 2
pic 3
outlet cover
pic 5
Version: 3:0
4x
2x
Publicidad
