Troubleshooting; Technical Data - NUK 10.749.057 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 17
Luftbefeuchter 1108 Seite 11 Mittwoch, 25. Februar 2009 10:21 10
Fault
Indicator lamp does not
come on, appliance does
not work.
The indicator lamp is on,
the fan is running, but no
mist is produced.
The humidifier is making
an unpleasant smell.
The humidifier is not
generating sufficient mist.
Voltage:
Power consumption:
Protection class:
Atomizer output:
Capacity:
Hygro-thermometer: 1 AG13, 1.5V-type battery

8. Troubleshooting

Cause
Humidifier not (properly)
connected to the power supply.
The water tank is empty or the
water level is too low.
The float ring of the water level
sensor is not fitted or is not
fitted correctly.
The appliance is still new.
The humidifier contains stale,
dirty water.
There is limescale on the
atomizer.
The water tank does not
contain enough water.

9. Technical Data

(220–240V~/50Hz)
40W
II
approx. 250ml/h
max. 2l
11
Remedy
Plug the mains supply plug (properly)
into the socket and switch on the
humidifier.
Fill the water tank with fresh, ideally
boiled or distilled water.
Check the float ring. The "TOP"
marking must be pointing upwards.
Clean the humidifier in accordance
with 7.2 on page 9.
Clean the water tank in accordance
with 7.2 on page 9 and fill it with
fresh, ideally boiled or distilled water.
Descale the atomizer.
Fill the water tank with fresh, ideally
boiled or distilled water.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido