Warnings - Fiorenzato F4 NANO Manual De Instrucciones

EN - WARNINGS
• Read thoroughly and stick closely to the in-
structions and warnings.
• Before use, ensure that the mains voltage is
the same as the voltage indicated on the data
plate of the machine.
• Connect the grinder-doser only to 10 A sock-
ets that are effi ciently earthed.
• Always remove the plug from the socket be-
fore carrying out any maintenance or clean-
ing of the grinder-dosers.
• Singlephase models are supplied complete
with cable and plug for connection to the
socket.
• Any tampering with the grinder-doser or
connections not complying with the above
indications invalidate the manufacturer's
guarantee.
• Do not operate the grinder-doser without
coffee in the hopper.
• Never tamper with the machines in any way.
• For any intervention on the machines, al-
ways apply only to the authorized service
centre.
• Never pull the power cable to remove the
plug from the socket.
• Only use the grinder-doser for the purposes
it is meant for.
• Position the grinder-doser a minimum of 5
cm from walls so as to allow good ventilation.
• Keep the grinder-doser away from sinks and
jets of water.
• Never leave the grinder-doser unguarded
when switched on.
• This grinder-doser is not to be used by peo-
ple with limited mental or physical abilities
or by children less than aged 8, or by peo-
ple lacking in the appropriate knowledge or
experience, unless properly supervised by
someone responsible for their safety.
• Children must be supervised to make sure
they don't play with the appliance.
• Cleaning and maintenance must not be done
by children without supervision.
• Never switch on the grinder-doser if it seems
to be faulty.
• Use only original accessories and parts.
• To avoid the danger of fire, never cover the
grinder-doser.
• If the power cable is damaged, it must be
replaced by the manufacturer, its technical
department or a person with similar experi-
ence in order to avoid any risk.
• Unplug the grinder-doser from the mains
when not in use for a long period.
• Let the grinder-doser cool down before
moving it.
• In the interest of safety, the grinder-doser
must always be considered connected and
live.
• Take care, as the grinding blades may con-
tinue rotating for a short while even after the
grinder-doser is switched off.
• Do not let liquids of any kind come into con-
tact with the internal or external parts of the
grinder-doser.
• Never put ground coffee in the hopper in-
tended only for coffee beans.
• Do not tamper with the grinder-doser.
• Do not touch the grinder-doser with damp or
wet hands or feet.
• The hopper must be fastened to the grinder-
dosers grinding system by means of the rel-
evant screw which must be inserted in the
threaded hole located on the upper grinding
blade holder and in the hole on the neck of
the hopper.
• Make sure that the coffee outlet is free from
any obstruction otherwise the appliance
will stop.
• The manufacturer cannot be held responsi-
ble for bodily injury or damage to property
if these regulations are not complied with.
• USA & CANADA - duty cycle:
25s "ON" | 60s "OFF"
If the grinder-doser is to remain inactive for
a long period, clean it carefully, wash and
dry the hopper and leave it open.
ATTENTION: Moving parts.
5