Publicidad
Idiomas disponibles
Idiomas disponibles
Remote Start
If the appliance is registered on a home Wi-Fi network,
this function starts preheating and then holds the
temperature for up to an hour (including preheating
time). If the appliance is not registered on the network,
"OFF" appears in the display. Follow the instructions
on page 40 to register the appliance on the network.
Set the oven mode knob to the Remote Start position
to use the function.
Setting Remote Start
1
Open the oven door to make sure the oven is
empty and ready for pre-heating. Close the oven
door.
2
Within 30 seconds of closing the door, turn the
oven mode knob to Remote Start to use the
function. If more than 30 seconds passes before
you initiate Remote Start, "door" appears in the
display. If this occurs, open and close the door
and try again.
3
When ON appears in the display, the Remote
Start function is ready to use.
4
Follow the directions in the smart phone
application to set the cook mode, temperature,
and run time (preheating time plus holding time).
NOTE
Do not place food in oven before or during
Remote Start run time.
Remote Start is disconnected in the following
situations:
• Remote Start is never set up in the smart phone
app.
• The Remote Start status is "OFF" or "door".
• Remote Start function can not be started if
either oven is in use.
• The Remote Start function cannot be started
when the oven door is open. A beep alerts you
to shut the door.
OPERATION
39
Publicidad
