Publicidad
Idiomas disponibles
Idiomas disponibles
Output specifications for the different sound effect modes
Effect
STANDARD
SURROUND
GAME PRO
ADAPTIVE SOUND
• When the input source is Dolby Atmos®, DTS:X, the Subwoofer-only setup provides 3.1.2 channel audio, while the Subwoofer & Wireless
Rear Speaker Kit setup provides 5.1.4 channel audio.
• The Samsung Wireless Rear Speaker Kit can be purchased separately. To purchase a Kit or the Subwoofer, contact the vendor you purchased
the Soundbar from.
• The Surround Speakers will not produce sounds for 2 channel output while STANDARD mode is in use. To enable sound for the Surround
Speakers, change the effect mode to SURROUND.
Adjusting the Soundbar volume with a TV remote control
Adjust the Soundbar volume using the TV's remote control.
• This function can be used with IR remote controls only. Bluetooth remote controls (remote controls that require pairing) are not
supported.
• Set the TV speaker to External Speaker to use this function.
• Manufacturers supporting this function:
VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA
1. Turn Off the Soundbar.
2. Push up and hold the WOOFER button for 5 seconds.
Each time you push the WOOFER button up and hold it for 5 seconds, the mode switches in the following order: "OFF-TV REMOTE" (Default
mode), "SAMSUNG-TV REMOTE", "ALL-TV REMOTE".
Remote Control Button
Input
2.0 ch
5.1 ch
2.0 ch
5.1 ch
2.0 ch
5.1 ch
2.0 ch
5.1 ch
Display
(Default mode)
OFF-TV REMOTE
SAMSUNG-TV REMOTE
ALL-TV REMOTE
ENG - 11
Output
With Subwoofer Only
2.1 ch
3.1 ch
3.1.2 ch
3.1.2 ch
3.1.2 ch
3.1.2 ch
3.1.2 ch
3.1.2 ch
Disable the TV remote control.
Enable a Samsung TV's IR remote control.
Enable a third-party TV's IR remote control.
With Subwoofer & Wireless Rear
Speaker Kit
2.1 ch
5.1 ch
5.1.4 ch
5.1.4 ch
5.1.4 ch
5.1.4 ch
5.1.4 ch
5.1.4 ch
Status
Publicidad
