DeWalt DCT411 Manual De Instrucciones página 19

Cámara inalámbrica de inspección 12v max
Ocultar thumbs Ver también para DCT411:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

so the screen slides on easily and no damage to the screen
occurs.
• If the screen freezes or won't turn on, insert a small object (i.e.,
paper clip end) into the reset button located on the back of the
screen.
• If the picture is dim, roll the brightness control switch to brighten
the LED light.
Accessories
WARNING: Since accessories, other than those offered by
D
WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the risk
of injury, only D
WALT recommended accessories should be used
E
with this product.
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center. If you
need assistance in locating any accessory, please contact D
Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286,
call 1-800-4-D
WALT (1-800-433-9258) or visit our website www.
E
dewalt.com.
RECOMMENDED ACCESSORIES
• Camera cable: 17mm diameter
• Camera cable: 9mm diameter
• 3' (.91m) cable extension: 17mm diameter
• Hook and magnet
Please contact D
WALT Industrial Tool Co., 701 East Joppa Road,
E
Baltimore, MD 21286, call 1-800-4-D
visit our website www.dewalt.com.
Repairs
The charger and inspection camera are not serviceable. There are
no serviceable parts inside the charger or inspection camera.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by a D
center, a D
service personnel. Always use identical replacement parts.
Three Year Limited Warranty
D
materials or workmanship for three years from the date of purchase.
This warranty does not cover part failure due to normal wear or tool
abuse. For further detail of warranty coverage and warranty repair
information, visit www.dewalt.com or call 1-800-4-D
433-9258). This warranty does not apply to accessories or damage
caused where repairs have been made or attempted by others. This
warranty gives you specific legal rights and you may have other
rights which vary in certain states or provinces.
In addition to the warranty, D
WALT
E
D
normal use, for free, any time during the first year after purchase.
If you are not completely satisfied with the performance of your
D
it within 90 days from the date of purchase with a receipt for a full
refund – no questions asked.
WALT (1-800-433-9258) or
E
LATIN AMERICA: This warranty does not apply to products sold
in Latin America. For products sold in Latin America, see country
specific warranty information contained in the packaging, call the
local company or see website for warranty information.
17
WALT authorized service center or other qualified
E
WALT will repair, without charge, any defects due to faulty
E
WALT tools are covered by our:
E
1 YEAR FREE SERVICE
WALT will maintain the tool and replace worn parts caused by
E
2 YEARS FREE SERVICE ON D
DC9071, DC9091, DC9096, DC9280, DC9360 and DC9180
90 DAY MONEY BACK GUARANTEE
WALT Power Tool, Laser, or Nailer for any reason, you can return
E
WALT factory service
E
WALT (1-800-
E
WALT BATTERY PACKS
E

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dct410Dct410s2

Tabla de contenido