Descargar Imprimir esta página

DeWalt DCT411 Manual De Instrucciones página 3

Cámara inalámbrica de inspección 12v max
Ocultar thumbs Ver también para DCT411:

Publicidad

Idiomas disponibles

Idiomas disponibles

Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY D
WALT TOOL, CALL US TOLL FREE AT: 1-800-4-D
E
(1-800-433-9258).
WARNING: To reduce the risk of injury, read the instruction
manual.
Important Safety Instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Only use attachments/accessories specified by the
manufacturer.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
Work Area Safety
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Keep children and bystanders away while operating an
inspection camera. Distractions can cause you to lose
control.
Personal Safety
a) Stay alert, watch what you are doing and use common
sense when operating an inspection camera. Do not use
an inspection camera while you are tired or under the
WALT
E
influence of drugs, alcohol or medication. A moment of
inattention while operating the inspection camera may result
in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Do not overreach. Keep proper footing and balance at all
times. This enables better control of the inspection camera
in unexpected situations.
d) Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught in
moving parts.
1
REFERENCE

Publicidad

loading

Este manual también es adecuado para:

Dct410Dct410s2