Descargar Imprimir esta página

Create COOL DC Manual Del Usuario página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 11
BAT TE RY R E PL ACE ME NT
• Use a button cell CR2025:
• Hold the battery cover down and turn coun-
ter-clockwise to open it.
• Insert a new battery with the + mark upwards.
• Place the battery cover back onto the remote then
rotate clockwise to the close position.
Caution: Do not recharge the battery after it has been used and keep out of reach from
children. Remove the battery if the remote is not being used for an extended period of time.
Consult a doctor if any component is swallowed. Take out battery if it is not to be used for
a long time.
• When operating the fan with the remote
control, we suggest that the remote control
is aimed at the receiver at the front of the
fan to achieve the best control signal.
• The following cases may occur when oper-
ating the fan:
1. This fan may work when using remote control of other electrical appliances.
2. Other appliances may work when using the remote control of this fan.
• This is due to the overlap of the frequency of the remote control. It is not a quality prob-
lem.
• Keep the remote control away from other appliances while using it to avoid misuse.
• Insert the mains power plug into the mains power socket and the LED button will be on.
RE MO TE CON TROL
All functions can be operated by the remote control.
1. Strong air flow
2. Speed increase / decrease
3. Low air flow
4. Swing
5. On / Off
6. Timer
8
ENGLISH
OPERATING INSTRUCTIONS
1
2
3
4
5
6

Publicidad

loading